Replaces
Frequently bought together
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Attention California Customers:
WARNING: This product can expose you to chemicals including 1,3-Butadiene, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Third Brake Light 1995-2003 Ford Ranger
Created on: 2011-10-14
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
In this video, we're going to show you to how to service the third brake light. We'll just replace a bulb as well as replace the entire unit itself if it's been damaged. The only tool you'll need is a Philips screwdriver.
To service this third brake light, you'll just need a Philips screwdriver. The light comes out. If you want to service a bulb, you can either disconnect the whole thing like this. Now the bulb just twist counterclockwise, pull them out and then they just pull from the socket, back in clockwise to lock. If you just had a little mishap at the lumber yard or just want a nice fresh look on your truck. From 1A Auto, you're just going to plug in, it will go right in place. We're going to shove the wiring in here just a little bit. We're going to get the screws to find the clip back there. Quick test.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us, Toll Free: 888-844-3393, we're the company that's here for you on the internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're working with our 2001 Ford Ranger. We're going to show you how to remove the third brake light lens. This is helpful if you're replacing the lens itself, or if you just need to get at the back of the housing to replace some bad bulbs.
If you like this video, please click subscribe. We have a ton more information on this truck as well as many other makes and models. If you want these parts for your car, you can follow the link down in the description over to 1AAuto.com.
The only items you'll need for this repair include the lens or the bulbs—depending on what you’re getting in there to change—and a number two Phillips head screwdriver.
Remove the two Phillips head screws from the lens. Remove the lens.
Now, if you need to replace the whole assembly, you can disconnect this connector here. A new one would simply snap into place, or if you just in here to change the bulbs, quarter turn counter clockwise removes the bulb socket from the lens. Remove the bulb by pulling straight out.
Install your new bulb. Install your bulb socket into the housing, and turn it clockwise to lock it back into place. These steps are the same for the other two bulbs if you need to replace them.
We'll place our lens back onto the truck, and reinstall our two Phillips head screws.
Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.
923-206
