Returns: Parts with electrical components cannot be returned once installed.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Throttle Body 2009-16 Ford Escape
How to Replace Throttle Body 2009-16 Ford Escape
Created on: 2019-02-22
Tools used
Socket Extensions
Flat Blade Screwdriver
Torque Wrench
8mm Socket
Ratchet
Pick
1. Removing the Air Intake Tube
Press the lock and disconnect the MAF sensor connector
Unclip the connector wiring from the air intake tube
Loosen the hose clamps with a flat blade screwdriver
Disconnect the vacuum hose from the air intake tube
2. Removing the Throttle Body
Disconnect the throttle body electrical connector with a pick
Remove the 8mm bolts from the throttle body
Remove the throttle body
3. Installing the Throttle Body
Remove the old gasket with a 90 degree pick
Press the new gasket to the mating surface
Press the throttle body into place
Tighten the 8mm bolt to the throttle body
Torque the 8mm bolts to 89 inch-pounds
Connect the throttle body connector
4. Installing the Air Intake Tube
Connect the vacuum line to the intake tube
Insert the air intake tube into place
Tighten the hose clamps with a flat blade screwdriver
Clip in the MAF sensor wire
Connect the MAF sensor electrical connector
5. Testing the Throttle Body
Start the vehicle and let the engine idle for some time
Wait for the engine stabilize and drop to normal idle range
Rev the engine a few times to test
Test drive the vehicle at 5 mph and then road test the vehicle
TBA07521
In Stock
Product Reviews
Loading reviews
4.71/ 5.07
7 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
2
0
0
0
Very satisfied
WALTER-FRED
August 12, 2017
Could not have gotten any better service. I recommend your place of business to all.
Throttle Body
M
November 6, 2017
The part was Awesome, installed it with no issues and worked great. The only Con I have is the product picture shows gaskets with the product. Kinda miss leading.
Cheap
David
February 25, 2019
Worked perfectly
J
December 17, 2020
I like everything about these parts I ordered. The quality of it exceeds my expectations. Great product at a great price! I will definitely be a returning customer this coming up summer for more parts as I have projects in mind on my car. Definitely would recommend anyone to 1A Auto.
Fixed problem
William
May 26, 2022
Did the job for my Sister in law. Unit went on easy. Vehicle performing better. We will see how long the unit last. It was a good price, easy replace.
Chris
September 19, 2023
Had it installed over the weekend (Sat.Sept.16). So far so good. Shipping was impeccable. Thanx
Cornell
October 9, 2023
It was a great fit at work perfectly
Customer Q&A
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.