Replaces

2010 Mercury Milan Throttle Body Assembly TRQ TBA07521

09-11 Mariner, Tribute; 09-14 Escape; 10-14 Fusion; 11-13 MKZ Throttle Body

$ 89.95

$137.95

35% OFF

$137.95

35% OFF

Ships Same Day - Free

Read 7 REVIEWS

TBA07521

In Stock

This part doesn’t fit a . Select from parts that fit.

Show parts that fit

Orders must be placed by 2pm ET

1A Auto Lifetime Warranty

Frequently bought together

2010 Mercury Milan Throttle Body Assembly TRQ TBA07521

$89.95

OBD2 Diagnostic Scan Tool

$51.95

Description

Vehicle Fit

Warranty & Shipping

How-To & Tools

Part Details

Throttle Position Sensor Included: Yes
Gasket Or Seal Included: No
Inlet Diameter: 2.36 in
Fuel System Type: Gasoline
Throttle Body Spacer Included: No
Throttle Body Type: Electric

Item Condition: New

Attention California Customers:

proposition 65 icon WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

Returns: Parts with electrical components cannot be returned once installed.

FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.

How to Replace Throttle Body 2009-16 Ford Escape

Created on:

Tools used

Socket Extensions

Flat Blade Screwdriver

Torque Wrench

8mm Socket

Ratchet

Pick

1. Removing the Air Intake Tube

Press the lock and disconnect the MAF sensor connector Unclip the connector wiring from the air intake tube Loosen the hose clamps with a flat blade screwdriver Disconnect the vacuum hose from the air intake tube

2. Removing the Throttle Body

Disconnect the throttle body electrical connector with a pick Remove the 8mm bolts from the throttle body Remove the throttle body

3. Installing the Throttle Body

Remove the old gasket with a 90 degree pick Press the new gasket to the mating surface Press the throttle body into place Tighten the 8mm bolt to the throttle body Torque the 8mm bolts to 89 inch-pounds Connect the throttle body connector

4. Installing the Air Intake Tube

Connect the vacuum line to the intake tube Insert the air intake tube into place Tighten the hose clamps with a flat blade screwdriver Clip in the MAF sensor wire Connect the MAF sensor electrical connector

5. Testing the Throttle Body

Start the vehicle and let the engine idle for some time Wait for the engine stabilize and drop to normal idle range Rev the engine a few times to test Test drive the vehicle at 5 mph and then road test the vehicle

Product Reviews

Loading reviews

4.71/ 5.0

Very satisfied

WALTER-FRED

Could not have gotten any better service. I recommend your place of business to all.

Throttle Body

The part was Awesome, installed it with no issues and worked great. The only Con I have is the product picture shows gaskets with the product. Kinda miss leading.

Cheap

David

Worked perfectly

I like everything about these parts I ordered. The quality of it exceeds my expectations. Great product at a great price! I will definitely be a returning customer this coming up summer for more parts as I have projects in mind on my car. Definitely would recommend anyone to 1A Auto.

Fixed problem

William

Did the job for my Sister in law. Unit went on easy. Vehicle performing better. We will see how long the unit last. It was a good price, easy replace.

Chris

Had it installed over the weekend (Sat.Sept.16). So far so good. Shipping was impeccable. Thanx

Cornell

It was a great fit at work perfectly

Customer Q&A

Does this work with 2009 Ford Fusion SEL 3.0 V6?

September 11, 2021

Alexis R

Currently, we do not carry this part for your vehicle. We're always updating our inventory so please check back soon!

September 13, 2021

Cristina P

Does this work for a 2009 Ford Fusion SEL V4?

October 25, 2021

William C

This part will not fit your vehicle, but we may have a part that is listed to fit. Please enter your vehicle's year make and model in the search bar at the top of the page. This will display parts guaranteed to fit your vehicle. Just be sure to verify all of the information shown in the Vehicle Fit tab before ordering.

October 25, 2021

Ricale A