Replaces
Frequently bought together
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Acrylonitrile, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. We've created thousands of videos to help you install our parts with confidence. That saves you time and money, so visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video we're going to be working with our 2001 Ford Ranger. We're going to show you how to remove and replace the power mirror switch, which is located in your driver's door. If you like this video, please click subscribe. We have a ton more information on this truck, as well as many other makes and models, and if you need parts for your vehicle, you can follow the link down in the description over to 1AAuto.com.
Here are the items you'll need for this repair: Phillips screwdriver, and a flat blade screwdriver.
Open your door. Remove the two Phillips head screws below the door handle. Open the door handle and release this panel from the door. To remove your power mirror switch, push down on the tabs that retain it into the panel, and push it through. You can now more easily access the retainers for the electrical connector, which we'll pry out carefully with a flat blade screwdriver. Remove the connector from the switch.
Reconnect the electrical connector. Line up your switch into the opening and push it in until it clicks. Line up this panel into your door. Snap the clips back into place, and reinstall the two Phillips head screws under the door handle.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
