Replaces

1990 Ford F250 Truck Gas Engine Fuel Level Sensor TRQ FPA79808

$ 30.95

$37.95

18% OFF

$37.95

18% OFF

FREE SAME DAY SHIPPING

Read 16 REVIEWS

FPA79808

In Stock

This part doesn’t fit a . Select from parts that fit.

Show parts that fit

Orders must be placed by 2pm ET

1A Auto Lifetime Warranty

Frequently bought together

1990 Ford F250 Truck Gas Engine Fuel Level Sensor TRQ FPA79808

$30.95

RAVEN: Powder-Free, Exam Grade, Fully Textued BLACK Nitrile NON LATEX 6 MIL Gloves (100/BOX) (L)

Large Disposable Gloves Box of 100

$25.95

Description

Vehicle Fit

Warranty & Shipping

Part Details

Includes: Gasket
Terminal Quantity: 2

Specification

Engine Fuel Type

Gas Engine

Item Condition: New

Attention California Customers:

proposition 65 icon WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.

Product Reviews

Loading reviews

4.44/ 5.0

Box get open

Cesar

Metal box get open ,when try to attach to fuel pump housing 2 times,I have to hold it togheter with zip ties ,and guess the contact tip was not secure touching potentiometer

Great

Works fine. No problems so far don't know what else to say

great value

Russell

bolted right on and it is less then half of the competitors price

Not exactly the same, but very close

Sending unit was simple to swap out and it fit right up. The only difference is the float arm required some bending to fit. How it arrived would have speed my tank empty when it was really around half full. Slight bending and reinstall got it hovering just over the bottom of the tank. It works, thats all I could ask for

Saved big money buying this part!!!

Couldn't find any parts in Canada without having to buy a $800.00 fuel pump assembly. Thanks 1A for helping me to find the part and to save me money!!

Fuel level sensor

I shopped around for the fuel level sensor for my 1993 ford and 1A auto offered this at a very affordable price so I ordered it and installed it and it worked great. So I ordered the second one for the other tank and now both gauges work in my truck. I got both these sensors cheaper than one sensor on another web site, thanks 1A auto I will definitely order from your store again. The free shipping was awesome also!

Just what we needed

We were really grateful for 1A auto and their help in getting us the part we needed. It worked great, we just had to adjust the arm a bit so it would detect fuel levels more accurately. Their super fast shipping was extremely helpful in getting the job done. Thanks!

Larry

Great sensor ,fit like oem , fast shipping.

Perfect fit!

I was having issues with my fuel gauge not reading the level properly on my 1995 F150. I have dual tanks and while the rear tank was still reading the level the way it should, the front tank gauge sits on E all day no matter if the tank is full or not. I did someresearch and found the bobber on the fluid level sensor can sometimes dismissible I the tank which causes it not to read properly. I saw 1AAuto the part I needed so I ordered it and it was here within a week! It attached to my fuel pump just like the previous one and Ive had zero issues since!

Good product

David

Bolted right in,, works good,, way cheaper than parts store.

Works OK.

Jayce

The level arm is way too long. Will not fit properly in the tank of 91 f150. Had to take the new one apart and use the arm of the old one. Look up other levels and pay attention to the length of the arm or compare to stock if you got it out and you will see the L is way too long.

Mckinley

Direct replacement for the fuel level sensor on an oem sending unit. Saved about 50 dollars vs buying a whole new sending unit and wasnt all that difficult to put on. Only tricky parts were the fuel line connections. Once the unit is out of the tank its only 2 screws and a wire, then youre good to go. Overall very satisfied

Esteban

Works great

Works great!

leonard

Works it it should so far 94 f150 302 v8 dual tanks

Great company, great part!

Tyler

got lost in the mail and they sent another one free of charge. put it in and it worked flawlessly. 5 stars for both part and seller

Good product

Preston

Works as it should. Fixed the issue of the fuel gauge not reading right.

Customer Q&A

Will this sensor fit a saddle or middle front tank on a 1995 Ford F150?

January 14, 2018

Bryce B

I don't know.

January 16, 2018

Jim L

This sensor is the float sensor for the actual fuel pump. The pump is mounted inside the tank.

January 16, 2018

Shane B

It fits the rear tank above the spare tire nicely. If the rheostat looks similar and mounts the same you may have to reuse the float arm assembly from the old sensor and put it on the new one

January 16, 2018

Peter R

Yes

November 10, 2020

David S

Will this work for the 16 gal front & 18 gal back tank / pumps?

February 23, 2020

Shane L

I can answer that this does fit the rear tank, (unsure of front.) however, it failed in only a month so I would avoid this all around

February 24, 2020

R O

Thank you for the inquiry. This fuel level sensor is correct for front or rear tank sending units. We can only guarantee fit based on the year, make, model and engine size of your vehicle.

February 24, 2020

Christa R

I used it on 16 gal tank, but should work for the 18 it will probably read empty before it actually is. You could measure the tank depth and compare to distance from the bottom of pump flange to where the float hangs and bend the rod some, or just use your old float rod if its still good. Either way this is better option than spending over 100 bucks on an OE sender or complete fuel pump.

February 29, 2020

Todd M

Will this fit my 95 rv Ford model f53. & Does it require fuel tank drop?

July 30, 2020

S H

Thank you for the inquiry. Yes, according to the information you provided, this part will fit your vehicle. It is made the same specifications as your OE. Please let us know if you have any other questions!

July 30, 2020

Christa R

Will this work on the front tank my 1996 Ford F-150 4.9?

August 3, 2020

J O

Thank you for the inquiry! Yes, this will work on the front tank. Please let us know if you have any additional questions.

August 3, 2020

Andra M

Will this float assembly fit in my front tank 1996 Ford F-150 4.9?

August 6, 2020

J O

Thank you for the inquiry. Yes, according to the information you provided, this part will fit your vehicle in the front. Please let us know if you have any other questions!

August 6, 2020

Christa R

will it fit 19 gallon tank?

August 23, 2020

B O

Thanks for your inquiry. This part is specific to vehicles with a particular set of options. We will need more information about your vehicle to confirm the fit. Please provide your 17-digit VIN and we can confirm the fit for you. Thank you!

August 24, 2020

Jessica D

Will this fuel sending unit work for my 91 F150 front tank?

February 18, 2022

Katherine S

Yes, this part will fit your vehicle.

February 18, 2022

Kelly S

Hi will this work on 1997 F-350 7.3 powerstroke?

April 1, 2023

FELIPE S

This part is listed to fit the 1997 Ford F350 V8 4.9L, 5.8L, and 7.5L vehicles.

April 3, 2023

Kemal S