Replaces
Replaces Ford Taurus Mercury Sable Front & Rear 16 Piece Steering & Suspension Kit TRQ PSA59049
$454.95
Replaces Ford Taurus Mercury Sable Front & Rear 8 Piece Suspension Kit TRQ PSA56233
$390.95
Replaces Ford Taurus Mercury Sable Front & Rear 4 Piece Strut & Spring Assembly Set TRQ SCA57014
$348.95
Replaces Ford Taurus Mercury Sable Front Catalytic Converter and Pipe Assembly Davico Mfg 19051
$311.13
Replaces Ford Taurus Mercury Sable Semi-Metallic Performance Brake Pad & Rotor Kit with Calipers TRQ Performance BKA52240
$294.95
Replaces Ford Taurus Mercury Sable A/C Compressor and Component Kit Four Seasons 4889NK
$293.95
Replaces Ford Taurus Mercury Sable Ceramic Performance Brake Pad & Rotor Kit with Calipers & Hoses TRQ Performance BKA34025
$290.95
Replaces 2004-05 Ford Taurus Mercury Sable Fuel Tank Kit TRQ FKA36174
$277.95
Replaces Ford Taurus Mercury Sable Ceramic Brake Pad & Rotor Kit with Calipers & Hoses TRQ BKA29810
$275.95
Replaces Ford Lincoln Mercury Front Driver & Passenger Side Ceramic Performance Brake Pad & Rotor Kit TRQ Performance BRA71649
$274.95
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace an ignition switch on this 2001 Ford Taurus. It's the same part and similar process on these Tauruses from 1990 to 2005. The items you'll need for this are a new ignition switch from 1AAuto.com, 7mm and 8mm socket and ratchet, and a T30 Torx driver or bit.
Start off by removing these two 8mm bolts. We'll just fast forward as Don does this. Now, just pull out on this panel, and it will pull free. Then, remove this 7mm bolt right here. Now, pull this harness down and out and remove these two T30 Torx bolts. Now your ignition switch will pull free.
On the left is the old ignition switch. On the right is the new one from 1A Auto. You can see they're identical, and they'll fit exactly the same. Ours also comes with a new adapter if you would like to replace that as well. The adapter is located right here. You would just pry that one out and push your new one in. You want to make sure that on your new ignition switch you have the switch lined up in the exact same spot as it is on your old one.
Then, you want to feed the switch right up into here. Just push it into place and replace those two T30 bolts. We'll fast forward as Don does this and then tightens them up. Reconnect this harness. Then tighten up that 7mm bolt. Line up the clips and push this panel back into place. Replace those two 8mm bolts at the bottom. Once you've tightened those up, you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
