Replaces
Frequently bought together
Item Condition:
New
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Hey, everyone, Sue here from 1A Auto. Today on our '06 Honda Element, we're gonna be installing a rear differential dynamic damper. If you need this part or any other part for your car, click on the link below, and head on over to 1aauto.com.
So here is the damper that we're gonna be taking out. The rubber portion's completely gone. It's just bouncing around, you can see that. It's mounted on the back of the dif. It's for basically when you're out on the highway or at high RPMs, when this differential's spinning, it picks up any vibrations, so you don't feel it in the vehicle when you get on the road.
The mounting bolt is right over here, it's one bolt. It looks like a 14-millimeter socket. I'm gonna use my half-inch so that I can at least break it free. It's doing that because of all the rust on the tip. It looks like it's still the original damper. I've already sprayed it, but I'm just gonna keep spraying it.
There we go. I don't think we need to take the bolt all the way out. You can if you want to, examine the threads. This damper will come right out this way. There we go. That's making some noise.
Here we have our new differential dynamic damper from 1A Auto. It comes with the welded mounting mat, the rubber seal on both ends. It has the bracket. Here's the factory one that we just took off. It's completely broken. They look identical. They have the same holding marks. Pin on this one broke off. There's the guide pin, and there's the balance shaft.
So if you need this part, or any other part for your car, click on the link below, head on over to 1aauto.com. I'm just going to put a little nevers, anti-seize, thread anti-seize. I'm gonna bring this back and guide it up, and see the tab right here. That's gonna go in the mounting. There's a slot on the side of that bracket. So bring it up, guide that in, bring your bolt through the other side.
Grab your 14-millimeter socket. I just held it, make sure you hold it tight so that that guide pin stays in that slot. Just tighten it down. Now with the new damper installed, you can see that the bushing's not broken. There'll be no more rattle or vibration.
Thanks for watching. Visit us at 1aauto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
