This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
924-796
In Stock
Product Reviews
Loading reviews
5.00/ 5.010
10 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
10
0
0
0
0
Good fit .
David
September 26, 2022
Fit like OEM. Action seems a little stiff. Some resistance when inserting the key. I neglected to take into account that I now have two keys for the truck. One to open the door and one for the ignition. It now is a Ford instead of a GM. The truck is almost 15 years old and I might get around to re-keying the door locks down the road.
Don't wait until your stranded to buy
Mikey
March 7, 2023
I was having an issue with my key not turning. I would have to jiggle the key like crazy, which only worked sometimes. I replaced it with this and now it's back to working like new. I called Autozone, and they wanted to charge me $107 for the same ignition cylinder.
Install new lock cylinder
Gerell
March 25, 2023
It work just grate install on 08 Cadillac escalade Lock Cylinder
Very easy to install
Trent
July 12, 2023
Works flawlessly. If your original cylinder lock won't turn with the original key remove the outer plastic cap and use a paper clip at the 9 o'clock position along the outer edge of the cylinder to push down the lock plate and then the original key should turn the ignition to the start position to then remove it. Very easy to program if you read the directions.
DAVID
July 26, 2023
Good
Excellent part
Stephen
August 13, 2023
Worked ?? great
John
October 20, 2023
2009 Silverado.
My keys or the original lock cylinder were worn so you had to giggle the key for a few (or several) minutes to start the truck. This solution worked great. I followed your video for changing the ignition lock cylinder and followed the instructions supplied with the part to program the supplied keys myself. Everything took about 45 minutes. I thought this was going to be a several hundred dollar ordeal with the dealership, programming keys, etc. $80 and the truck starts every time without "giggling". I now have 2 keys on each ring. The original keys unlock the doors. The new keys start the truck. Just like the old days.
Ignition
Steve
November 5, 2023
Great service
Perfect replacement
ROBERT
May 15, 2024
This was so easy and it worked perfectly
Paul
October 18, 2024
So far so good. I used this lock and key set on my 2008 impala. The program procedure is different than the video 1a auto has. This is what I did.
After replacing lock cylinder and hooking back up the batt. Put new keys in the ignition and turn it on (don't crank it over) leave key on for 11 minutes. (Security light will go off) Turn key off and then turn back on for 11 minutes. Turn key off and then turn key back on for 11 minutes.. turn key off for five minutes. Turn the key over and crank the car. If you want to program the second key- turn the key that cranked the car to on position for ten seconds and turn off and remove. Put second key in and turn to the on position for ten seconds and turn off...... This is what worked for me.
-God bless-
Customer Q&A
Do you have to get key programed for 09 gmc sierra 1500?February 1, 2023
John D
10
Yes, the keys will need to be programmed. The proper steps are shown in the video linked below:
https://youtu.be/xQLKe4S47qA
February 1, 2023
Jessica D
Are the keys blank slates or do they have cut threads already?March 1, 2023
Phillip AV M
10
Threads already cut.
March 1, 2023
Lynn M
10
They come already cut to the ignition
March 7, 2023
Mikey Y
nesesito el swecht para una tahoo 2011?April 19, 2023
Carlos L
10
This part is correct for your vehicle if it has the Onboard Programming.
April 19, 2023
Andra M
How many keys come with it?November 5, 2023
Wesley W
10
It comes with two keys and a program key.....5 stars
November 5, 2023
Steve D
10
2. But I add that you will have to carry one ignition key and the old ignition key to unlock the doors. You can take the old and new ignition locks and change the tumblers to match the old key.
November 7, 2023
David Y
10
good to go
November 23, 2023
DAVID B
10
2
November 23, 2023
DAVID B
Some one has a key to my impala will the new one stop them from stealing the car ?March 19, 2024
Marty R
10
The new lock and cylinder prevents any other keys from use
March 19, 2024
Dave G
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.
