Replaces

1999 Jeep Cherokee L4 2.5L Exhaust Manifold TRQ EXA52287

$ 77.95

$150.95

48% OFF

$150.95

48% OFF

FREE SAME DAY SHIPPING

Read 14 REVIEWS

EXA52287

In Stock

This part doesn’t fit a . Select from parts that fit.

Show parts that fit

Orders must be placed by 2pm ET

1A Auto Lifetime Warranty

Frequently bought together

1999 Jeep Cherokee L4 2.5L Exhaust Manifold TRQ EXA52287

$77.95

RAVEN: Powder-Free, Exam Grade, Fully Textued BLACK Nitrile NON LATEX 6 MIL Gloves (100/BOX) (XL)

XL Disposable Gloves Box of 100

$25.95

Description

Vehicle Fit

Warranty & Shipping

Part Details

Material: Cast Iron

Specification

Engine Displacement (Metric)

L4 2.5L

Item Condition: New

Attention California Customers:

proposition 65 icon WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.

Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.

Expedited is available on checkout to the United States, excluding Alaska, Hawaii.

Final shipping costs are available at checkout.

Product Reviews

Loading reviews

3.57/ 5.0

Great fit at a very affordable price and delivery time was wonderful as well.

So far, so good!!!

My Wrangler has leaked exhaust since I bought it a year ago. Tried several liquid metal products to fill the cracks and the last one was fairly successful, but there was still a leak. Bought this based on the reviews and warranty, and my Jeep sounds/smells awesome!! I took the power steering pump off the intake, removed the airbox and tube, removed the throttle cable, then left all the electrical connections in place. Took out the bolts and slid the exhaust out from between the intake and head. Took about an hour and a half. Well made product and works great so far. Dan

manifold

carmen

looks good I put it on now well see how it lasts......

Jeep 2.5 exh.manifold

Great price on this part. Heavier made than the original. However , the flange was thicker than original , thicker than the intake flange, and that required machining to let the bolt and washer properly hold the manifold set together against the head. Both flanges have to be the same thickness. The intake will not tighten without removal of some of the extra thickness from the new exhaust manifold flange.

Great price

Emmett

I purchased the exhaust manifold from 1A for about half what it was at the "parts house". I personally did not install it I had a mechanic do it. He didnt have any complaints adout the install and as far as i can tell it works great no leaks. I would recommend this item to anyone. It was also shipped and delivered in a very timely manner.

Much better that original

Much heavier and robust than the factory manifold that was on my TJ. Bolting surfaces are about an 1/8" thicker which causes an issues where exhaust manifold and intake manifold share bolts. Easily remedied by spot facing these areas with a mill or small grinder (dremel, die grinder, etc)

Jeep TJ 4 cyl exhaust manifold

Thomas

The manifold arrived quickly. It was a good fit, however some modification to the heat shield was necessary to install the top center bolt and to clear the motor mount. This was frustrating as it had to be removed twice. Jeep is very quiet now.

Manifold is thicker than stock

As the title states, the manifold is thicker than the stock one, on the plate specifically where it bolts to the head. The issue is that the intake is now to thin (bolts on with the manifold). The heat shield was also in the way of one of the bolt holes and had to be modified. I'll figure out a way to make it work. The manifold looks to be good quality, despite the flaws.

Works

Jeremy

It works and fits fine without the thermal shield. The thermal shield was too big to fit in with the intake manifold.

Nice with modifications

Kevin

This product is as other reviews have mentioned. It does not fit right without modifications. The top hole needs to be drilled out to line up with the shield. The side bolts holes are too thick and do not sit flush when mounted therefore must be ground down a ways. I had to take off about a half an inch to make it work efficiently. After all is said and done, the jeep is quieter, tho I didnt notice any gains in power at all.

Bad machining

Bolt flanges not machined to proper depth. Barely enough bolt head to hold intake on at same time. Manifold cracked again after 1 month. Would not buy this again.

Gives Chinese manufacturing its bad name

Jon

Bolt holes are off, flanges are tapped wrong, heat shield doesnt fit. The adjustments to make this thing work added at least $200 to the repair. Youre better off spending the extra money for a better product.

Good casting, terrible fitment

Jon

Bolt holes are out of alignment. Heat shield must be cut & bent to accommodate intake manifold. Flange hole threads are unusable, must be drilled & tapped for Helicoils. Not a drop-in replacement for OEM manifold, pipe must be modified. Expect to spend an extra $200-300 on installation labor.

Amazing

Robert

Perfect replacement and fast shipping!!!

Customer Q&A

The four bolts that hold on the exhaust manifold on my 98 Dakota, ?

January 3, 2021

Michael S

New hardware is not included with this item except what is shown in the photos. You may be able to reuse your original hardware if it is in good condition.

January 7, 2021

Adam G