WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How To Replace Cabin Filter 2007-12 Dodge Caliber
Created on:
Tools used
No Tools Needed
1. Remove the cabin air filter
Open the glove box and pinch the sides to unclip it and lower it all the way.
Open the cabin air filter cover now exposed.
Remove the filter
2. Install the new cabin filter
Put the new cabin filter into place.
Fit the cover over it.
Pinch the sides of the glove box and close it, clipping it into place.
Brought to you by 1AAuto.com your source for quality replacement parts and the best service on the internet. Hi I'm Don from 1A Auto. I hope this how to video helps you out and the next time you need a part for your vehicle think of 1AAuto.com. Thanks.
In this video we're going to show you how to replace the cabin air filter on this 2008 Dodge Caliber and the only item you're going to need for this is a new cabin air filter. Start off by pulling down your glove box and then you want to push in, there's a clip on either side here; you want to just push the sides in and pull down. Then it will just hang down and back behind the glove box you'll see this panel with two tabs, one on either side. Just push those tabs in and the panel comes off and then your air filter is right here and it pulls right out. Take your new cabin air filter and with the air flow arrow pointing down just slide that into place and then just take that panel and just snap it back into place. Then push in the sides of your glove box and push it back up into place and you're all set.
We hope this helps you out. Brought to you by www.1AAuto.com your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet and in person.
CFA18266
In Stock
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Jeep is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Jeep or FCA US LLC.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.