WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How To Replace Throttle Position Sensor 2002-06 Jeep Liberty
Created on:
Tools used
T20 Driver
1. Remove the old throttle position sensor
Disconnect the wiring harness.
Remove the two T20 Torx bolts.
2. Install the new throttle position sensor from 1A Auto
Insert the throttle position sensor
Secure the sensor with your T20 Torx driver
Connect the wiring harness.
Brought to you by 1AAuto.com your source for quality replacement parts and the best service on the internet. Hi. I'm Don from 1A Auto. I hope this how-to video helps you out and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks. In this video, we're going to show you how to replace the throttle position sensor on this 2006 Jeep Liberty with the 3.7 liter V-6 engine. The only tool you'll need is a T20 Torx bit and a ratchet.
Your throttle position sensor is located right here. You want to start off by pulling out this red clip on the harness, pushing the tab and pulling the harness free. On your throttle position sensor, there are two T20 Torx bolts. There's one there and one right there. Just go ahead and remove those. We'll fast-forward as Don does this. Once those are removed, the throttle position sensor will pull right off. Then take your new one, push it into place and replace those two T20 Torx bolts. Again, we'll fast-forward as Don just tightens those up. Reconnect your harness. Push in the red clip and you're all set.
We hope this video helps you out brought to you by 1AAuto.com your source for quality replacement parts and the best service on the internet. Please feel free to call us toll-free 888-844-3393. We're a company that's here for you on the internet and in person.
ESA94910
In Stock
Product Reviews
Loading reviews
5.00/ 5.04
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
0
0
0
Just what my jeep needed.
william
March 5, 2017
After being told I needed 5000 dollars in repairs, I found out myself I only needed this part. I ordered , got what I ordered replaced the old with new and my jeep runs great. Thanks 1aauto.
Easy install, works like a charm
T
June 25, 2017
The throttle position sensor in my 02 jeep liberty went out on me early this summer. I ordered the part, it was delivered promptly, and I had it installed the very same day. The installation was very easy and the videos provided by A1 made it a breeze!
Good parts
Robert
May 11, 2021
Good part. It fix all my throttle problems that it was having.
Had to have it
Frank
November 13, 2024
What can I say about this part. Everything was as we talked about. it put my mind ease and I had to have it. The part itself was an exact fit and worked great. Thank you for that.
Customer Q&A
Does it comes with screws?June 11, 2024
John D
10
No, just the sensor.
June 12, 2024
David V
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Dodge is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Dodge or FCA US LLC.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.