WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
How to Replace Oil Pressure Switch 2003-12 Jeep Liberty
Created on:
Tools used
27mm socket
Drain Pan
Ratchet
Pick
1. Removing the Oil Pressure Sensor
Place a drain pain underneath the oil pressure sensor
Pry out the red tab on the oil pressure sensor with a pick
Remove the oil pressure sensor with a 27mm socket
2. Installing the Oil Pressure Sensor
Feed the oil pressure sensor into place
Twist the oil sensor pressure into place by hand
Tighten the sensor with a socket and ratchet
Reconnect the oil pressure sensor harness
Push the red tab back in on the sensor harness
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the oil pressure sensor on this 2004 Jeep Liberty with the 3.7 liter V6 engine. The items you'll need for this include a new oil pressure sensor from 1AAuto.com, a right angle pick, a 27mm socket and ratchet with an extension, and a drip pan.
Your oil pressure sensor is located right up here above your oil filter. You want to start off by prying out the red tab on the harness. The tool that worked best for us was a 90 pick or a right angle pick. You pry out the red tab and pull the harness free. Now use a 27mm socket to remove the sensor.
On the left is the old oil pressure sensor; on the right is the new one from 1A Auto. You can see they're identical, and they're going to fit exactly the same. Feed your new oil pressure sensor up into place and twist it in by hand. Then tighten it up with your socket and ratchet. Now reconnect your harness, push that red tab back in, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
SWA40935
In Stock
Product Reviews
Loading reviews
5.00/ 5.01
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Robert
January 28, 2024
Another perfect fit from A1 Auto!
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chrysler is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Chrysler or FCA US LLC.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.