Replaces
Frequently bought together
Returns: Parts with electrical components cannot be returned once installed.
Left Hand Drive:
All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
The blower motor resister is here under the dash. Actually, you can just see it, just make out the outline of this white and aluminum looking piece. It's got this little plastic protector so the passenger doesn't kick it. Behind it is the electrical connector. This is the harness it, pull the harness down a little bit. Actually, it might even be easier, we're going to unscrew it, there's two Phillip's head screws. We'll pull the resistor out and then unplug it. You're going to need a stubby Phillip's head screwdriver. This aren't very long. Pull it out. Grab the other one. The resistor will come out of the air box. I got to unplug it.
To reinstall it, leave it unplugged for now. Slide it up in here. There's an alignment tab, and there's a tab in the blower motor box that it has to line up with, so it goes to the front of the car. Slide it up into place. It'll kind of stay in place. The seal will hold it. Take our Phillip's head screws, reinstall them. An electrical connector, plug it back in. Put the harness back up in there. Blower motor resister is replaced.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
