Replaces
Frequently bought together
Genuine original equipment part (OEM) that was factory installed on your vehicle by the manufacturer.
Item Condition:
New
1 Year Warranty
This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Open the hood. The release handle is down on the left side, under the dashboard. Safety release is here, and the prop rod is hooked to the bottom of the hood. If your washer reservoir cap is broken or missing, you can get a new one from 1AAuto.com. It's as simple as you turn it counterclockwise to unlock the filler neck tube.
It will pull out of the washer fluid reservoir. Sometimes these break at the tether. Actually, you can see this one's getting a little weak but it's still there. So your new one, if just the tether's left here, you can just take it and pull it right off.
Install the new on in the same way. Push it on. Take your washer filler neck and place it in, and we're going to turn it clockwise to lock it. That's locked in. Put the cap back on, and it's replaced.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
