WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Radiator Overflow Bottle 1992-96 Toyota Camry
Created on:
Tools used
Slip-Joint Pliers
1. Remove the radiator coolant tank
Use a pair of pliers to remove the clamp on the hose.
Pull the bottle up and out.
2. install the new radiator coolant tank
Insert the bottle onto the mount.
Use the pliers to re clamp the hose to the radiator.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. In this video, we're going to show you replace the radiator overflow bottle, or reservoir, on this '94 Camry. Very easy. The only tool you'll need is a pair of pliers. Don't let anybody tell you this is a hard one to do.
There's a little clip here. You can use a pair of pliers or you could just use your hand. Press that. Twist the hose. I'm just going to use my pliers here. The only thing I'm using my pliers for is to grab onto the hose. Getting it to twist. Pulling it off. Pull your bottle up and out. New one from 1A Auto. You can see, all the same. You might have to cut the hose to fit. Other than that, you can just use either a razor knife or a pair of scissors. Cut the hose to fit. It mounts in there. There's nothing wrong with this bottle. I'm not one to waste a good bottle. I'll just reinstall it. The installation is just as easy as put down. There's a little pin that goes into a rubber stop here. Pin in. Push it down. Push your hose on. Squeeze the clip into place.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free: 888-844-3393. We're the company who is here for you on the internet and in person.
ECA92498
In Stock
Product Reviews
Loading reviews
4.58/ 5.024
24 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
18
3
2
1
0
Over flow tank
Michael
March 20, 2017
Fits perfectly in my 92 Camry V6. Installed in about 3 minutes. Just pulled off hoses and installed on new cap.
My Lexus overflow bottle
T
July 31, 2017
I bought this at the third of the cost of anywhere else. This was a good buy and works perfectly. I will use you for any more parts needed for my old car.
Stephan
January 28, 2018
could not find this item no other place.I tried about ten Autoparts stores.you guys came through.Impressive!!
Matt
February 5, 2018
Good overflow container. It fit perfectly and is performing just as I thought it would. I highly recommend it to anyone who has a Toyota Camry as well
Perfect fit!
Ricky
March 24, 2019
Took all of 5 minutes to replace the old cracked brittle one.
Good quality, Loose fit.
David
July 14, 2019
The part that slides into the bracket on car is smaller than original. I had to wedge some stuff around it to make it snug. Other than that it works as it should.
K
August 8, 2019
Yes I would recommend A1 Auto to my friends and family. I got the rite part. It fit good. Thank you
Works Great!
R
September 3, 2019
Works as described! Also a lot cheaper then my local store which is huge! I would recommend.
Subpar performance for an OEM replacement
T
November 30, 2019
It fits my 96 Camry LE 2.2L DOHC. The only issues are that the fit isn't fully snug like the OEM reservoir to the frame of the car (it wobbles around), and that the O-Ring on the cap doesn't seal against the container-- causing the cap to not be able to close. The issue was resolved by taking the O-Ring out and displacing it slightly offset of the cap to where there is a little overhang from the port.
I'm not too happy with the performance of the reservoir, but it works and it's reasonably priced.
W
January 17, 2020
Works as advertised, a direct fit
Good product needs a better fit
Benjamin
May 8, 2020
Fit worked well with a hose clamp. Good material and works well!
The right part, the right price, the right place - 1A Auto
A
May 11, 2020
The coolant reservoir was the correct one for my 94 Camry and functions just as the original one. A much better and reliable part from 1A Auto than looking for one at a salvage yard. As for price comparison, 1A Auto wins, again. Previous parts from 1A Auto are reliable and perform to my expectations and satisfaction.
Radiator reservoir
M
September 8, 2020
The price was great the part came fast and free shipping and fit perfectly.
Great price quality product
Corrinna
April 23, 2021
finally found this at a price that didnt rob the bank and the product was a quality item thank you
Great price , great service !
Jeffrey
November 12, 2021
The reservoir was a perfect fit. No tools required. Got here fast and great price . Thanks 1 Aauto. !!!
Mike
December 11, 2021
Good
Robert
April 24, 2022
Exact fit, great quality . Three minute install.
First Time Customer
Peter
September 4, 2022
Part was OK, but free shipping slow with USPS. But it was free.
Works fine
Michael
September 6, 2022
The fit to the clamp on the inside fender wasn't great and required a little "adjusting" of the clamp. But it's half the price of aftermarket parts from the big chain parts stores and it holds the coolant without leaking.
Perfecto
Luis
September 11, 2022
Excellent
Alan
September 23, 2022
Great Product and easy to install.
Great Replacement reservoir
Morris
May 10, 2023
Great Replacement reservoir for my radiator
Great tank just like the original
Jeremy
June 24, 2023
Nice quality great price. My original one was brittle and cracking apart. This one is exactly like the original just without the holes. Now I would recommend a different grommet at the bottom where this tank sits as mine was a bit loose fitting but I bet mine is just worn. It holds coolant nicely
Poor fit and quality
Kenneth
May 14, 2024
The reservoir did not have a high and low mark as the other trq reservoir I have purchase from your company.
The cap for the reservoir was not fully formed for the overflow hose to be able to fit on. This product was poor quality in my opinion.
Other TRQ products have been ok, but this one was inferior to past products.
Customer Q&A
Does it come with a new cap?April 30, 2016
Jason E
10
Mine did. Came with a cap and short hose that drops into bottle.
April 30, 2016
Greg K
10
Yes, the snap-on black cap with the two ports on it.
May 3, 2016
Scott B
10
Yes, the new overflow tank did come with a new cap. I have been very satisfied with everything I have purchased from 1 A Auto for my 1995 Camry LE.
May 3, 2016
Samuel K
10
Will this fit a 1994 Toyota Camry LE V6
August 11, 2019
Argenis P
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.