Replaces
Frequently bought together
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
We will remove the overflow hose from the radiator. So just be careful, this is plastic, you don't want to break it. Pull that off. This just slides onto a bracket. Just want to try to lift it straight up. Sometimes they get stuck—kind of work it back and forth. It does have some coolant in it, so let's drain it afterward and dispose of it properly. That's if I can get it off of here. Take the cap off. Put that right here. Pinch in here. There it is. So, basically just sliding off of this bracket here. I'm going to dispose of the coolant that's in here.
Here's our original coolant overflow reservoir from our vehicle. It's kind of old and yellowed. Full mark, low mark, has the hose and cap on it. So, our brand new one from 1A Auto. Full mark, low mark, comes with a new hose and a new cap. It'll slide right into place and replace the old one. So, we'll slide the new one right over the bracket. Snap and it locks in place.
Put the new hose on and it fits with a pretty good with a nice, tight seal, but it also came with a small clamp. The original one didn't have a clamp but it is a nice feature to have that clamp on here. I'm just going to orientate it in a way that it's not pointing upwards. Point it this way, that way, if you're leaning under the hood, you don't catch these parts sticking up. So, I'll just turn it down like that. Same thing with this one, you can turn it down.
Can just open the cap. Top it off with the appropriate 50/50 mixture of coolant and water that the vehicle calls for. Install the cap.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
