Replaces

2004 Toyota Sequoia Metal Reinforced Upgrade Liftgate Handle TRQ DHA49946

Name: 1ABTH00049-Toyota Sequoia Sienna Metal Reinforced Upgrade Liftgate Handle TRQ DHA49946
Brand: TRQ
SKU: 1ABTH00049
Price: 24.95 USD
Availability: InStock
Rating: 4/ 5.0 (154 reviews)

98-03 Toyota Sienna; 01-07 Toyota Sequoia Liftgate Metal Handle

$ 24.95

$30.95

19% OFF

$30.95

19% OFF

FREE SAME DAY SHIPPING

Read 154 REVIEWS

DHA49946

In Stock

This part doesn’t fit a . Select from parts that fit.

Show parts that fit

Orders must be placed by 2pm ET

1A Auto Lifetime Warranty

Frequently bought together

2004 Toyota Sequoia Metal Reinforced Upgrade Liftgate Handle TRQ DHA49946

$24.95

RAVEN: Powder-Free, Exam Grade, Fully Textued BLACK Nitrile NON LATEX 6 MIL Gloves (100/BOX) (XL)

XL Disposable Gloves Box of 100

$25.95

Product Reviews

Loading reviews

4.39/ 5.0

Great replacement, greate price, great service by 1AAuto!

Junilu

Extremely satisfied with my purchase of this item from 1AAUTO. Definitely will be a repeat customer for any other spare auto parts needs in the future. The instruction video was extremely helpful and saved me a lot of time and effort. I received the part within 3 days of ordering and it was exactly as described. The metal lift gate handle replacement is definitely going to last a lot longer than the original plastic part. Buying this part (50% off!) cost me much less (at least $400) than what my local Toyota dealer quoted me to replace the part. Here are a few tips for prospective buyers/DIYers specific to replacing the lift gate handle: 1. Each of the two fixed 10mm bolts that are integral to the lift gate handle assembly has a rubber washer. The replacement part doesn't come with the rubber washers but you can take the washers from the broken part and put them on the new part. 2. When taking the panel off the liftgate, be sure to pry it off with a slow and steady force. The pa

2002 Toyota Sienna Liftgate Handle

David

This is the third and final lift gate handle for our Toyota Sienna. The first two replacements were by Toyota, and like the original handle, they were plastic and broke within a year or two of a costly installation by the dealer. I chose this replacement metal handle and have every reason to believe it will be long lasting. I followed the installation video and found it to be a simple D-I-Y job, actually taking less than an hour to complete. I also found 1A Auto to have the best price as well as free shipping.

Great Fit and Easy Repair

Martin

Part came quickly, and was better quality than the OEM part. Repair took less than an hour. My local Toyota dealer wanted $1,000 to repair..Unbelievable!!!

Sequoia Liftgate Handel

Mike

I ordered one Lift Gate Handle and a Window Motor for the Rear Hatch Door for my 2003 Toyota Sequoia. I received two (2) Lift Gate Handles and no (0) Motor for my Rear Hatch Door.??? So I installed one of the Lift Gate Handles I received and it failed in less than a couple of days. A real inconvenience!!! So I'm going to return the broken handle after installing the second one. I need to know where to return the broken handle AND should I be expecting the Motor for the Rear Hatch Door??. Mike Lecourias @ 713-516-1680., Thank you,

Fits well

Norman

The original equipment was made of plastic and engineered to last six years depending on use. The installed replacement is metal and fits well. Installation was time consuming as the rear Inside dope molding had to be remove. Toyota parts department wanted in excess of one hundred dollars for the part which was not stocked

Great service

Juan

I really enjoyed this product, and I belive it's better then the dealers parts.

2003 Toyota Sequoia Lift Gate Handle

Barry

Great website, easy purchase, quick delivery, similar to OEM part and felt heavier, hope the weight helps strengthen the latch. Had to modify the lever outside throw sticking out too far to fit into the hole. Cut 1/4" off the end of lever sticking out and completed installation. Very difficult repair with the electric rear window blocking access and view of the handle. I hope the part never breaks because I don't want to make this repair again. Hope this help you and A1 with QC.

Better than original

Brent

Got this for my mother in law and she thanks me every time she see me great product would recommend to anyone

eddie

Very effective ,lot more precise than two original Toyota handles!!!

Not as easy to install as it sounds

Noah

tailgate is harder to open with this handle. The install took a while because the automatic window hardware is right in the way.

Awesome

Ron

Quality is outstanding the only thing I would add is to replace the locking mechanism at the same time for a smoother operation

wendy

perfect all the way around! Handle was installed and works great! Shipped in a timely manner!

Like a dream!

Daniel

Requires barely any effort to open the hatch now, super well made, and relatively easy to install with minimal effort. Great product!

Good quality and delivered on time

Mehr

It was my first time experience and I am glad the part reached on time and there were no shipping charge or sales tax.. Good Job guys

Toyota tail lift gate handle.

linh

This is beautiful. Better then original one. Metal, durable. Perfect fit. Easy installation. 1aauto is good. Not just the price and quality. Also provide video demonstration. Thumbs up all the time.

Your video makes this a simple install

Thomas

I had absolutely no problems replacing the broken plastic handle after watching your video. Thanks.

on point!

macus

It works just like the original. It closes with a nice solid easy squeeze versus the original that seemed to be a tense more strenuous squeeze. It is also made of more metal versus the plastic original one that broke easy.

A poor fit

Thomas

The handle looked just like the original. I installed the new handle and found that it did not fit properly. They bent the mounting tabs too high , so when you put the trim back on it stuck up. I had to swap the handle over to my original mounting bracket.

Great improvement over the original

Walter

This appears much stronger than the original handle and 1A Auto had a good video for installation - and at a fraction of the price of the OEM piece of junk handle. I love it when aftermarket manufacturers see poorly designed problematic parts and greatly improve on them - then offer it at a price lower than the OEM. Great job!

Rear Door Fixed

The parts worked perfectly and it feels like a very solid repair

Good Value

The handle installed with ease. So far after 4 months or so it is still working fine. It is a little stiffer than the factory one but for the price it is a good deal, especially if it holds up the life of the vehicle. We'll see.

This part did not fit. I had to use part of my old part and fit it into the new part. I called your co. and the man I talked with understood . and made a refund. Thank you Dave Wolven

2002 Toyota Sequoia

Back door latch on my sequoia . From 1aauto. Get 3 stars bcz not fit flush, it have a gap between body and part. First I thought I did wrong . Take it apart do it again same thing. The gap still there . But it work ok just a little ugly when u looking straight at the gap.

Sturdy part

This part feels much stronger than the plastic one that broke. Fit perfectly. Product arrived earlier than expected. Highly recommend 1a auto and this product

I received the part. When my mechanic installed, it didn't function right. Cannot open my liftgate. So he bought a new plastic latch and installed it and it work. I sent a message via you contact link that I was to return the part and want a refu

JULIUS

Please read the title block. I wrong my survey/feedback in there.

Shipping was fast. It fit great and glad it's all metal. Bought one a few years ago and part of it was plastic and it did not last long.

Impressed

Gloria

I received my part promptly. My husband installed with no trouble. He's impressed. Works like a charm. Thank you 1A AUTO I can once again use the rear door to my van. Life saver.

Yes MOST Metal, some plastic

Douglas

The hand lever and attachment interface are metal... the lever show on the right hand side of the picture (not the cable lever to the left) .... is the part that breaks.... at least for my vehicle.... is still plastic on this replacement part. So not really ALL metal. Suggest that anyone that replaces this part should lube up cable and door latch well to reduce stress on this plastic component.

2002 Toyota Sequoia liftgate replacement handle

After looking for a replacement handle for our 2002 Toyota Sequoia I decided on this all metal handle instead of the mostly all plastic OEM handle. Upon receiving this handle it appears to be of good quality and stronger than the original. I had no issues with the installation as the fit was accurate. Once installed it felt stronger than OEM part and works very well. Time will tell if this part is better than OEM part but it appears it is and will. Ordering was easy and shipping was standard. I would considering ordering parts again from this business.

Fit perfectly

I only gave 4 stars as I just installed it with no proof of longtime reliability. If it works as the lifetime replacement to the plastic one that lasted for 17 years I will be very satisfied.

Done!

Jarrod

Part fit perfectly and the video was very helpful.

Installation video

I've watched the video prior to installing the part and it was very helpful. It showed me exactly where the nuts and bolts to remove. Will be sharing this website to family and friends.

Sienna Liftgate Handle

Very sturdy all metal handle. Installation about 30 minutes. Saved about $400! So far works great! Thanks

Great product and service!

Part arrived early in secure package. Part is made of metal, not plastic. Considerably more "heft" than the OEM part that broke. Installation video accurately demonstrated how to install the part. Highly recommend this part and 1aauto!

Liftgste handle

lisa

Received my replacement handle quickly and was just as pictured. So glad to have access to my way back in my van again. Thanks so much for providing reasonable replacements for my vehicle.

latch lever bent

Bob

The latch arrived earlier than expected and installed easily. Unfortunately, about two days later, the latch was harder to operate and then failed. It appears that a lever inside the latch had bent. I resolved this by using the handle from the new latch and the latch body from the old latch. Adjustment of the latch bail at the bottom of the door opening made operation of the handle much easier. Hopefully it will last.

Works Great

Works great and delivery much faster than expected.

Toyota should be ashamed

FINALLY, a real fix for the plastic junk Toyota used in the hatch. Works perfect. I had replaced the latch with the Toyota plastic junk 6 times.

Sequoia lift gate handle

Stacey

This handle feels very sturdy, this is the third handle that I have purchased. I would recommend anyone that has a Sequoia to buy this handle, you will not be disappointed!!

Sequoia lift gate Handel

Was $20 cheaper then my local Auto Parts ! Part was delivered 3 days earlier then was told !! Will definitely order from here again !!

Metal lift gate handle

After two Factoty Toyota Plastic replacement lift gate failures, I purchased this metal handle from 1aauto and walla, problem solved! The metal latch now will not break when I have used it over time like the plastic one from the dealer! 5 stars out it 5. I will look for other replacement parts for my Sequoia when it comes to replacement time!

Best replacement ever.

Dianne27

This is a great replacement handle. All metal dont Have to worry about this breaking and not $400 for plastic like the dealership. I would tell anyone to get this handle by far.

Exact fit & sturdy

Sturdy metal handle fit my Toyota Sequoia 2003 perfectly. Better replacement than the previous one I replaced it with which broke when things froze up.

Wow

JOHN

Item arrived on time and was an easy install Thanks to the video.

Toyota rear latch

I've been buying these Toyota rear latches from the junkyard as they break from my Toyota Sequoia and they usually last about a year-and-a-half to two years so this time I bought one aftermarket from China that's made of steel not the original Toyota parts that was plastic hopefully this does the trick and I don't have to replace it once every year and a half to two years

All metal product!

The original stock item on my car is the same part (essentially) except the portion of the part that broke was made of plastic. What led me to this website is a repair video on YouTube done by 1A Auto. For less than $30, they sell this part that is made of ALL medal. The video showed how easy it was to replace and install this part in my car and I know that I'll never have to replace it in my car's lifetime. Totally worth it. I would buy this same product from this vendor all over again.

Reliable company

Peter

I have never regretted for choosing 1A as my auto parts supplier. They are very reliable and efficient. Their customer service is also exceptional. To order an auto parts from 1A auto is highly recommended and a decision in the right direction.

Easy install

New item fit like OEM. Felt "strange" due to all metal construction but will definitely outlast remaining life of vehicle.

Toyota Sienna lift gate handle

On 2/17/ 2018 I installed the handle on the lift gate. The hardest part was putting the trim panel back on. I had replaced the plastic handle years ago. I still needed to watch the how to video as a refresher. I had done it before and I am so glad I used a little antisieze on the screws and fasteners. That was not on the video that just my own doing. The metal handle is great , everything works well, better than new.

Great part. nice fit.

I am very happy with my order from A1 Auto. They had the option of an all metal part instead of the plastic one that you get from Toyota at three times the price. I highly recommend them.

Nice Upgrade from the Factory Plastic Version

Ronald

Somewhat of a pain to install, but definitely doable with the video. Saved me a ton of money versus having the dealership replace with the original plastic version which I had done twice previously. I will buy this metal version if it ever breaks again.

Perfect fit!

Gus

We ordered this item as a sturdy metal replacement for the weak broken plastic OEM lift gate handle. The construction is BETTER than the OEM original, the price was outstanding and the shipping fast. I recommend this part, and I trust and recommend 1A Auto. I will be buying from them again.

Worked like a charm

Hovik

Original handle broke and was in need of replacement. Like an idiot I went to amazon and got that was defective (didn't engage cable enough to trigger lock mechanism). Came to 1A auto and ordered a handle which ended up working perfectly.

Sienna rear door handle

Trent

The correct part came very quickly and the video helped get the door open and installed. Good Job

Rear Door Handle...

Eric

MAN WHEN IT COMES TO PARTS AND PRICE.YOU CANT BEAT QUALITY AND PRICE TOGETHER..1Aauto.com IS MY PLACE..TRY OUT THE COMPANY BECOME A BELIEVER.

Much better than OEM

Lewis

This lift gate handle solves a very simple issue. Plastic does not hold up over time. The repair was simple DIY with the help of YouTube. Lewis

Great company!

Briggs

Needed a part quickly and at a great price! You delivered! Definitely recommend

My purchase

I bought Toyota hatch handle. I received it as promised and product actually exceeded my expectations.

High quality part

Ive had other versions of this part break during the winter. Twice. This part is a much higher quality metal-body construction than the others Ive seen online. And the 1A price was less to boot. This part is highly recommended.

Solid replacement

Highly recommend the metal replacement piece as opposed to the plastic one. The gate handle here is a little stiffer than the stock piece, but that isn't a problem. It fit perfectly. Installation was simple, I just had some complications removing rusted out licence-plate screws but other than that it was not difficult.

Tailgate lift handle fit perfectly

I purchased a tailgate lift handle for my 03 Siemna that was of obvious quality and it fit perfectly. Do the research and dont select the lower priced plastic version from Other online suppliers.

Excellent quality, better than OEM

Brett

The part arrived on time and was the correct part. The original is plastuc, which is why I had to replace. New part is metal, amd less than a dealership charges for OEM plastic handle. Looks like 1AAuto has some good prices overall, amd so far, quality is better than OEM

Latch

This product was exactly as described. Love the upgrade! This product is way better than the original plastic piece which broke every year for 3 years. Hoping this one lasts longer.

Great so far

I like the all metal construction. It installed well and is a perfect fit. Time will tel how it holds up but it feels very solid and durable! I would recommend if your Sequoias rear hatch handle breaks! Fix it quickly before you latch seizes up!

Sequoia rear latch

Glad i found this metal rear latch. This is a quality latch; it fits perfectly and it will not break. Do not waste your money on those plastic latch at the Toyota dealer.

Pretty easy fix

William

Product is much sturdier than factory made Toyota plastic version which was just replaced 2 years ago by a Toyota Dealer. The only issue I ran across was the how-to video was based on a different model vehicle so I had to consult additional resources to complete the project.

Lift gate handle for a 2004 Sequoia

As most of you know the lift gate handled designed by Toyota is really quite bad. I have replaced it once already and it broke again. They wanted something like $160 at the dealer so I refused to pay so much for a terrible product. I came across 1A Auto and saw that it was a steel reinforced lift gate handle that was much better and cheaper. So I signed up. The price was great, the delivery was quicker then stated and the product works amazing. You can certainly tell the difference in quality for sure. Thanks 1A Auto for providing amazing value.

It works

Adela

The part got to us a few days after I ordered it. I am happy that the part works. It was a little difficult to install, so was glad that the tutorial video was available.

Perfect fit

The item was as described and fit perfectly and replaced the cheap handle that was installed last time by lift gate broke. Thanks

Maybe didn't fit right

Maybe garnish was warped/damaged, but the poor fit wasn't there until after installing the replacement handle. The part pushed the top of the stock garnish piece out just slightly. Installing the OE toyota handle took the slight bulge out of the garnish. Holes lined up fine. Cable holder was much tighter than stock, which would eventually sever the cable casing.

Great Product

I would highly recommend this product!! A million times better compared to the junk plastic handle that comes stock. Install can be tedious but there are plenty of videos out there that helps explain the procedure, and if you are mechanically inclined you will do fine. Words of advice be gentle and patient because due to the year of vehicle parts can be extremely brittle. My install was on a 2001 Toyota Sequioa. Thank you 1A Auto! I look forward to future purchases!

The part was exactly as described on the video.

When I looked at the video on how to remove and install the part it really was as simple as it was shown on the video. Also the part was heavy duty so it wont break as easy as the original part from Toyotae about it.

Good prices and videos decent

Eric

Also received the parts as expected. Please consider adding to the video an issue that I had after installing the rear door handle, Even after testing the handle operation manually I thought I was done. I then left the rear door closed and installed the side door handle. Only after electronically locking the van I discovered that the rear door handle would not open with key or door locks. Found solution online where this rear handle latch may need to be manually adjusted with pliers at the top cable assembly by prying it down a little at a time to where the cable will freely move within the rear door latch part. After that the door opens as should.

Back door latch

Imran

Nicely made part. Foam around the inside edge is over lapping and needed to be trimmed. Overall very nicely made part. Once replaced the door is not as smooth to open like b4 but seems to be fine.

Mark

Very fast shipping. Parts look very well made. Great to deal with.

Way better than stock

Robert

Buy this and replace the garbage that is from the factory. Smoother action, stronger built and easy to install.

Toyota handle

Jeff

The handle works much better than the replacement handle I previously installed.

Sturdy Part

Robert

This part is hefty and I'm sure will outlive the 2003 Toyota Sienna I installed it on. The video was a significant help and I had no issues installing it. Once you remove the two nuts and one bolts that holds the outside trim piece (where the actual handle is mounted) be careful to push out the plastic retaining clip -- otherwise it will snap and you will need to buy a new retaining clip (or just let the trim piece be loose on the left side.

1ABTH00049-Toyota Sequoia Sienna Textured Black Liftgate Handle

George

Purchased and installed this handle and is of quality materials. The only downfall to it is the linkage is sloppy. But seems to work for now.

Toyota Sequoia Sienna Textured Black Liftgate Handle - 1ABTH00049

Greg

installed on '07 Sequoia... fit perfect, easy install, liftgate works again!

NOT FULLY METAL

The description says "made in metal form to provide a stronger, more durable handle" which is a total lie. The mounting is made of metal but the handle with the lever that pulls the wire (the one that is getting broken) is plastic. Just like the original part. Please don't buy it if you hope this is going to last longer. It's just an aftermarket part. BTW I bought the original for $250 so even just as a replacement it's might be not that bad. Just make sure you live the wire when you install a new handle. Otherwise it will get broken in a few month. This part is NO stronger than the original.

Liftgate Handle

Georgann

After installing handle I found that the liftgate will only open after you use the key, even when the master unlock is engaged. I have been unable to correct this. I guess being able to use the rear access is better than no access.

Great quality

I bought a replacement hatch handle for my 2006 Toyota Seqouia. The quality of the handle was by far way better than the factory handle. It was made of metal instead of plastic and the tutorial made is simple to replace.

Tina

This is the 2nd lift gate handle Ive ordered in the last 4 months for my rear Toyota Sequoia door. This one seems to be made much better than the last one. Easy is install just a pain when you have to do it in 100 degree weather.

Sequoia rear hatch handle

Made out of metal definitely better than the original plastic so far so good

HEAVY DUTY LIFTGATE HANDLE

frank

Cost a bit more but is the best not one of those chip handle, this will last forever, very good product

Good experience

jose

Good product, delivered on time .

Awesome!

David

I am very, very pleased with this purchase. Well made, easy to install. Price was very reasonable. Will return to shop here again. Will let other people know to shop 1AAuto.com.

Pretty good for the price

Decent product. Average quality and works well when replacing the latch and cable as well. Fit was pretty good. Had to mess with it a little to get things to line up. Good middle of the road price and about half of the OEM handle. Well see how long it lasts.

Good product, good price, fast shipment

The cheap plastic handle Toyota put in my van broke and I had no use of the hatch! Found this all metal handle for a great price. It arrived in a few days, install was simple, and in an hour I was back in bnusiness.

Satisfied

franklin

Quick processing and shipping. The metal opposed to the plastic stock handle will hopefully prevent us from replacing this part again.

Toyota Sequoia Sienna Liftgate Handle

Gerard

Handle installed fine, upon initial assembly. Installed and opened and closed door fine. However when I took a trip to Walmart and locked the car, the handle did not activate to open the door. So i had to take the door apart again and found the arm of the handle was oriented too high and put tension on the cable to the point where the locking mechanism did not line up to disengage. I reached in with a channel lock and bent the arm down about 1/4 inch and worked perfectly. The moral of the story, check the locking and unlock before you put the panel on and if it does not work you may have to adjust slightly. thx BDX.

Sienna Liftgate Handle

Perfect fit for my 2002 Sienna. The item arrived on time will surely use 1A auto in future purchases.

Was what I needed and at a good price. Delivered in a short period of time

Much more confident

Adam

This went in easily enough, and I feel much less terrified of breaking my latch handle while on a trip.

Great quality, easy to install

Henri

I have previously replaced the liftgate handle on my 2003 Sienna two times in the past with the Toyota genuine part ... which is made of plastic and eventually breaks. This handle is metal and feels more solid. I don't think it will ever break! I'm not at all mechanically inclined, but from watching YouTube videos on installing this part, installation was a breeze. Just under 1/2 hour to install.

05 Toyota Sequoia Liftgate handle

True ALL metal handle. (stock oem is plastic) Fit perfectly and works great with ease. I highly recommend this handle over the $75 OEM, which is still plastic.

Better than original Factory part.

Clifford

Better than original. Thanks guys!

2002 Toyota Sequoia with 165000+ miles

BRYAN

The original latch failed at about 8 years. Replaced with another plastic latch that was suppose to be better??. It went a few weeks ago. Now on my third latch and this one from 1A Auto is all metal??. I would give 10 stars if this was an option. Thank you for videos to fix my problem. A VERY satisfied customer.

Defective part

Garrett

I bought this handle because it was all steel and would not break again. But the lever was an inch too high. It seemed impossible to even get it into position so they sent me another one but it was exactly the same. With great effort I installed it but it is still the wrong position to operate the cable properly so I can't use it at all. I just wasted 20 days ordering and waiting for the part and then installing it twice.

I made it workable. Not as tough as it looks.

Jonathan

I was excited that this product was all metal and not plastic. However it is pretty thin metal. I tightened the bolts in and the flange ears bent all up. I was able to straighten them and make it work. One bolt cross-threaded and I had to break it out and use a new bolt in its place. I also needed to cut some of the trim piece around the License plate in order for it to fit in place of the old handle. If you are careful in tightening the bolts it should be good to use.

Broke within a month

Overall I love 1aauto but this item broke within a month. I purchased because it was all medal sadly I might have to buy another one hopefully that one doesn't break.

Tail gate handle

DANIEL

Made strong with cast steel. Angle is wrong once it locks the van it wont open with handle . They refunded the money great service. Buy from them again because of the service.

Sturdy Handle

Kirk

Very well made and strong handle replacement for my Sequoia!

Perfect!!!

Anthony

Excellent quality. Very fast shipping. Will be doing business again.

Perfect

Bobby

Exactly what we needed!

Aldrena

Good ??

2005 Toyota Sequoia Upgraded Hatch Handle

Gerald

The handle seems much stronger that the OEM. I did have to straighten it to mount it, however. It arrived slightly bent, but this may be due to shipping.

Quality

Chris

Way better quality than oem.

Fit perfectly.

Dan

This part fit perfectly, had everything I needed for the installation and is a better quality than the original.

I wanted to like this handle but

Whit

I desperate wanted to like this handle as the price is right, but it would not work with my Sequoia. I had to bend the metal to create enough space to keep the proper tension on the cable that actuates the latch to lift the tailgate, but 3 times in a row, after a period of time it would stop working and I was unable to open the lift gate and would have to disassemble the lift gate from the inside to try again. After the third failure I order the OEM handle which works like a charm. The handle is all metal, but dont be surprised if the product does not perform as well or not at all as the OEM handle.

So far so good.

Nick

So far so good - install was pretty straight forward, found a very helpful video on YouTube. Fingers crossed that it will last longer than the OEM one I had installed about a year prior

2001 Toyota Sienna liftgate handle

roberto

Its well fitted. Easy to follow you tube instruction in removing and installing. Thank you ??

2000 mToyota Sienna Rear Door Latch

Larry

Worked perfectly on my 2000 Toyota Sienna, just as advertised. Thanks!

Heavy duty handle

Terrence

Good handle replacement for my Sienna , heavy duty will last forever, it is made of metal no plastic parts. Easy to install with no problem.

Eduardo

Garbage, worked a few times and then stopped. Flimsy metal, bends easily with hands.

Connie

It came quickly and was easy to install. Fit well.

Joel

Worked great.

Everything was perfect

Steven

Everything was perfect Definitely my go to store for parts in the future.

John

Excellent Product

Justin

Works like oem

Great product!

Marvin

Awesome upgrade! The old plastic one broke and this metal one feels nice and sturdy. There's a couple reviewers that say theirs broke right away, but they either got lemons or were somehow abusive because I don't anticipate ever having to replace this one ever due to the sturdy construction.

Exact fit 04 Sequoia

Randy

Exact fit for my 04 Sequoia with quick shipping

Ronald

Fit and works as it should

Todd

long time for shipping metal better than cheap plastic models needs a better permanent mount for end of cable

THOMAS

Within 5 uses it broke. Not sure whats going on.

James

1st rate product.

jorge

Great costumer service, excellent product

Toyota Sequoia lift gate handle

Anthony

The handle needed a little tweaking to fit, but all good. Definitely would recommend.

Impressive part

Christopher

All metal latch. Every piece is metal. The part it great . It is better than oem latch??

Very well made .

Alonzo

fit perfectly on my 2002 Toyota Sienna.

Better than original

jonathan

It is better than the original it was plastic. And I installed with video provided. Saves 300$ thanks 1aauto

Beefy Handel replacement

Randy

The part is much more sturdy (metal vs. plastic) than the original part. I had to bend one of the attachment flanges flat as it had become slight bent during handling. It fit well into the tailgate, but could not fasten the small screws that hold it to the license plate light frame. No matter as the larger bolts fasten the handle to the lift gate.

Terry

It was a little bigger than the OEM. The size made it a little harder to install. Outside of that it worked fine.

Efrain

It worked but it wasn't an oem fit.

Junk

Michael

The rocker arm that pulls the cable bent immediately. I had to modify it to get it to work. The rest of the handle seems to work adequately.

Perfect part!

William

Perfect parts, hatchback finally works!

Not OE, but works.

Robb

Not an exact OE fit. Had to modify the mount surface to make it fit correctly. It pushed out the plastic trim around the license plate. Had to cut off a bit of plastic where it screws to the trim piece. Also the slot where the cable connects was too large and cable ball kept falling off. A little bend with pliers got it to stay.

01 sienna lift gate handle

Mark

Easy repair. Video was helpful. Part fit perfect!

I received a upgrade from original plastic door handles to a metal one.

Charles

A awesome experience with a quality part that is better than the original one.

Jess

Better than expected

Great metal replacement

Caleb

It's a solid replacement. Replaced the original handle with another brand and had issues within a month with the replacement. This one is much better. The metal construction is nice and allows for easier opening.

Courtney

Broke within a week.

Paul

Part broke after about 2 years

shalim

i purchased my 2005 sequoia brand new from the dealership after about 10 months the latch broke i went to the dealer and was shown a brochure that it was not covered under warranty. I bought a replacement from the dealer which last about 5 months i was very frustrated and did not know what to do . so i started to look on line and came across this website i made the purchase and installed it thinking how long will it last, i was really surprise that a few years have gone by without any issue VERY GOOD LATCH> THIS IS THE LATCH TO BUY IF YOU HAVE THIS PROBLEM.

Christiane

Great product! Very sturdy! Beats the original Toyota part made out of some kind of plastic any day! Fit without problems

KARL

Very good

Rick

Perfect

Derek

Love that it's metal.

Mark

Product works good.

Perfect all metal replacement handle

Richard

Perfect replacement. Appreciate metal construction

Great product, same as on line

Salvador

Better upgrade than original all metal

Doesn't work for 2001 Toyota Sequoia

Jeremy

Finally got around to installing it, but the gap on the piece that holds the ball end of the latch cable is way too large and I couldn't attach the latch cable to this new handle. When I tested it, it just slipped off. The gap was a good 1/8" wider than the stock part. I've purchased a similar handle before for another Toyota we used to have and it worked very well but this is completely useless in my Sequoia. I sourced a used metal handle from the scrap yard and used that and it was designed just fine and works. Just want a refund.

Good upgrade

Alex

Nice upgrade from the original plastic piece. Only down side is that it does require more tension to open now.

Customer Q&A

Is the hook that engages the mechanism metal too?

March 13, 2016

Ivan G

Everything was metal in this replacement part. Not plastic like the original. It is a little stiffer, takes a little more force to pull, but not a problem.

March 13, 2016

Andre G

Yes, the part is all metal. Better than the original part

March 14, 2016

Jerry H

It is. Mine has been installed for nearly 2 years now and, except for a little WD40 every now and then, is holding up great.

March 14, 2016

Ben M

My lift gate is closed. The handle just flops around. How do I open it to get to the inside panel? 2002 Sequoia.

April 8, 2020

BILL G

Thanks for your inquiry. There could be multiple reasons why you're having this particular problem. We suggest taking your vehicle to a nearby reputable shop to identify the cause. Once you know the cause, we'll be happy to see if we carry the parts and how-to videos needed for your repair.

April 8, 2020

Peter L

My Lift-gate has power locks. There is an electrical "box" over the top of the latch so I cant' see the latch itself. Does this part work with all lift gates, power lock or not?

April 15, 2020

BILL G

It should work fine with power locks. Our Sequoia has power locks and it fit perfect. Just be prepared to remove the interior panel on the lift gate to access the parts. Hope that helps.

April 16, 2020

Marc H

Thank you for contacting us! Yes, this lift gate is listed to for models with or without the power lock. Please let us know if you have any further questions, thank you!

April 16, 2020

Jessica D

2004 Toyota Sequoia Metal Reinforced Upgrade Liftgate Handle TRQ DHA49946

DHA49946

In Stock

DHA49946

In Stock

Product Reviews

Same Day Shipping

Guaranteed To Fit

USA Customer Support

Instructional Video Library

2004 Toyota Sequoia Metal Reinforced Upgrade Liftgate Handle TRQ DHA49946

DHA49946

In Stock

Enter your zip code

DHA49946

In Stock

Product Reviews

Same Day Shipping

Guaranteed To Fit

USA Customer Support

Instructional Video Library