Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Cruise Control Lever 1984-91 GMC Jimmy Full Size
Created on:
Tools used
Wire or String
Flashlight
1. Removing the Signal/Wiper Stalk
Pull the stalk firmly out.
Remove the lower dash panel. Three screws in this vehicle.
Remove the AC duct.
Shake the stalk to help locate the wire and where it connects.
Disconnect the lead.
Put wire through the hole on the lead and secure it to the lead.
Pull the stalk out until the wire comes out through the steering column.
2. Replacing the Signal/Wiper Stalk
Connect the wire to the harness of the new stalk.
Pull the wire from under the dash until the lead comes through.
Push the stalk in to place.
Remove the wire.
Reconnect the lead.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20 plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
In this video, we're going to show you how to replace the turn signal/cruise/wiper activator stalk on this 1986 GMC Jimmy, same as a whole bunch of different GM cars from the '80s and to the early '90s with this type of stalk. The only tools you'll need, you'll need a string or a piece of wire and also maybe some pliers and a flashlight will help.
To replace one of these stalks is pretty easy. This is your cruise control switch, but it's not actually your wiper switch. It's a activator for your wiper switch. Your wiper switch is actually in the steering column, but to replace this stalk, you basically just pull out firmly and then you want to kind of leave it right here.
What you need to do now is find the other end of this wire underneath the dash. On this truck what I'm going to do is I'm going to take out three screws in this part. It's going to differ depending on your vehicle. If you don't have AC then you can probably find this wire pretty easily. This truck has AC so I have to take out the lower AC duct. I'm just loosening up. I took out one screw, I'm loosening up two others. Then on this truck, my AC duct, just kind of pulls right out here. You may want to put your head up under here and shake this wire back and forth and you can see the wire and where it connects into. On this vehicle, it connects into a clip.
I'm going to take this out of its place and disconnect the lead. There's your lead. Here's the end of my lead. I got a piece of wire here and there's a little hole in it. I put my wire through that hole, bend it and secure it on here. Now, what I can do is kind of feed everything up in there. It goes right up into here. Then it comes right out. Now, you're going to unhook your wire. Here's my new one from 1A Auto and you can see, it's all the same. Many times the reason you want to replace these is just because the graphics on a new one are so much nicer and brighter and generally and sometimes this piece here will break off.
To reinstall, I'm just actually going to take my wire or maybe I'll use string or whatever. I'm just going re-strip it and do a nice new string. That way I know nothing will happen. It won't break or something. A couple of things I found. You can just take this sheath and kind of pull it right out of there because you can actually just slide that in afterwards. Also, this little insulator that goes onto here, while it's a good thing if you can get it down in there, most of the time what I find is it just provides just a little too much bulk to get everything down through.
Take your wire. Make sure it gets started into the right area, down underneath that switch. You see I'm kind of twisting the wire that just kind of gets the connector to twist around a little bit. Now, you can see I've got the connector down on this end so I'm going to pull it up through. I am going to put my switch in and push it all the way in. Now, what I'm going do, I'm going to take this plastic sheath and I press the wire into it and then I can just slide the sheath right up on the wire in the column and that protects it than the columns, tilting. Now, I can connect the harness. I can clip it back into where it goes. Then I'll put my AC duct back in and we're all set.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet and in person.
BSS00591
In Stock
Product Reviews
Loading reviews
4.88/ 5.016
16 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
14
2
0
0
0
Functions as intended
G
October 20, 2017
Videos were very helpful and detailed, product functioning as intended with no issues.
Camarillo turn signal switch
Stephen
July 10, 2018
Works well looks original good price fast shipping and correct part
Excellent Service
J
September 13, 2018
The multi function switch was easy to install an works great and that all came at a fair cost
Thank you
Wiper/cruise control lever
Shawn
December 4, 2018
The lever was an exact replacement lever and the installation video was spot on. Great product and the price was extremely good. I would definitely refer this to anyone in need. Thank you.
Just what the doctor ordered!
CHARLES
December 14, 2018
I have a 92' Jeep Cherokee and this was the right part at the right price. Works great!
Good Service
L
March 16, 2020
Good Service and the right product
Great!
L
November 6, 2020
The fact that it took no time at all to arrive was pleasantly surprising. As well as being a great qualty. ...
Can't go wrong
Great product
Daniel
August 10, 2021
Perfect improvement to my steering column. Thanks!
Easy replacement
Tyler
December 24, 2021
Installed easily in an 87 XJ
Randy
April 16, 2022
Very good good parts
Perfect fit!
William
August 30, 2022
Fit perfect and I LOVED the accompanying video!!
LUKE
March 10, 2023
Great product that works as good as the original! 10/10 would recommend to everyone
Parts for 86 Fiero were available
BARBARA
August 11, 2023
Parts received on time; follow up exceptional.
Would Definitely Recommend
Michael
January 27, 2024
Direct fit, quality product and great installation instructions/video.
Just like factory
Nathaniel
April 17, 2024
Looks good
'85 Suburban Wiper Arm Replacement
Christopher
October 3, 2024
The part was as advertised and the correct one for the job. The video didn't capture the difficulty of the task but that was probably due to my lack of experience. In the end, I got it to work.
Customer Q&A
Wondering if that switch will fit my 95 Pontiac grand Prix SE 3.1liter V6?June 2, 2017
John N
10
This will not fit your 95 Grand Prix. At this time we do not offer the appropriate replacement you are searching for.
June 2, 2017
Alex P
Little confused, is this just for 'cosmetic' or does it really fix problems, mine is the wiper intermittent starts going faster?March 10, 2023
John D
10
My problem was the high beams would come on when I would signal left turn at night. Replaced signal turn lever and problem was solved
March 10, 2023
Anthony P
10
I have a similar issue. I changed my switch but the issue has persisted. I cant say for sure that it wont fix yours but after further research in my case it seems that these issues are caused in the wiper motor. Which I will be swapping out as soon as weather allows. I hope this helps. Search through the various dodge truck forums. Thats where I found my suggested fix.
March 10, 2023
Robin P
10
Hello, this is not a cosmetic part, this is a turn signal lever.
Please enter your vehicle's year make and model in the search bar at the top of the page. This will display parts guaranteed to fit your vehicle. Just be sure to verify all of the information shown in the Vehicle Fit tab before ordering.
March 10, 2023
Ricale A
10
I bought this for my 86 gmc and it works good! It's a great oem replacement, I highly recommend!
March 11, 2023
LUKE M
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Jeep is a registered trademark of FCA US LLC. 1A Auto is not affiliated with or sponsored by Jeep or FCA US LLC.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.