WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Vehicle Speed Sensor 2000-10 Chevy Suburban
Created on:
Tools used
Jack Stands
19mm Wrench
Floor Jack
1. Removing the Speed Sensor
Disconnect the speed sensor wiring harness
Remove the speed sensor with a 19mm wrench
Pull out the speed sensor O-ring
2. Installing the New Speed Sensor
Push the new speed sensor into place
Tighten the speed sensor with a 19mm wrench
Connect the speed sensor wiring harness
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and, please, next time you need parts for your vehicle, think of 1AAuto.com.
In this video, we're going to show you how to replace the four-wheel drive speed sensor on this 2002 Chevy Suburban. It's the same part and similar process on these Suburbans from 2000 - 2010. The items you'll need for this is a new four-wheel drive speed sensor from 1AAuto.com, and a 19mm wrench. You may want to use jack and jack stands for some extra room, but they're not required.
Your four-wheel drive speed sensor is located right here. You'll want to just lift up on this tab and pull the harness free. Then, using an 19mm wrench just twist the sensor out. We'll fast-forward as Mike does this. Pull out this O-ring.
On the left is the old speed sensor, on the right is the new one from 1A Auto. You can see they're identical and they'll fit exactly the same. Push your new speed sensor down into place and twist it in. We'll fast forward as Mike does this and then tightens it up with the 19 mm wrench. Reconnect the harness, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
VSA92874
In Stock
Product Reviews
Loading reviews
5.00/ 5.07
7 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
7
0
0
0
0
Great quality part
Preston
March 14, 2018
This was exactly what my truck needed for a hiccup that it was having. Good quality part fast shipping
Fast shipping/correct part
J
March 23, 2020
Shipped to me quickly. Easy to install.
Great product
Karlos
October 7, 2020
Exactly what I needed. Great customer service.
Great product
D
November 3, 2020
Have a 2009 2500hd duramax and it fit perfectly just like OEM. Has been working fine since installed.
Cheap prices
John
November 22, 2020
Why buy from a auto parts store when you can get the same thing for way cheaper. Parts come from the same place initially and doesn't need to get marked way up for others profits. I've saved thousands and watching videos makes parts easy to install.
Right part on time
F
January 17, 2021
Arrived on time. Solved the problems that were occurring. Speedometer was bouncing, shifts were erratic and, cruise control was unable to stay at the set speed. The part hooked up properly and truck is back to normals. I recommend this part if youre experiencing similar symptoms.
John
July 25, 2021
This item is exactly what I needed
Customer Q&A
I have a 2005 awd suburban, the front wheel beering were replace. The truck now seems to make a grinding noise when starting from a stop. Will this part solve that problem?August 23, 2015
DANIEL C
10
I don't think the rear wheel speed sensor will help you. It measures the speed of the vehicle and inputs the speed into the trucks computer. An abs speed sensor measures the front wheel speeds to ensure they are going the same speed to indicate if your brakes are slowing the vehicle evenly across the front wheels. I have also had to replace a right front abs sensor that was bad in my 2005 4wd Suburban. A bad sensor should not cause a grinding noise.
There could be multiple reasons why you're having this particular problem. We suggest taking your vehicle to a nearby reputable shop to identify the cause. Once you know the cause, we'll be happy to see if we carry the parts and how-to videos needed for your repair.
October 11, 2021
Ricale A
Slipping going into 3rd gear. Will this sensor cause that to happen ?July 21, 2022
Rich R
10
There could be multiple reasons why you're having this particular problem. We suggest taking your vehicle to a nearby reputable shop to identify the cause. Once you know the cause, we'll be happy to see if we carry the parts and how-to videos needed for your repair.
July 22, 2022
Emma F
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
GMC is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by GMC or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.