Replaces
Frequently bought together
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a power window switch on this 2004 Volkswagen Jetta. We show you on the rear passenger side door but it's the same part and similar process for the front passenger door and the rear driver's side door. The items that you'll need for this are a new power window switch from 1AAuto.com, a Phillips screwdriver, a flat blade screwdriver, and a T20 Torx driver.
Carefully pry off your pull handle cover with a flat blade screwdriver. Then you want to remove this Phillips screw and this Phillips screw right here. And we'll just fast forward as Don removes those. Then you want to remove this T20 screw and this T20 screw. We'll fast forward as Don removes those. Now, pry out on the door panel to release the clips. Then, lift it up and out of the window sill and pull it back. Then you want to disconnect these two harnesses right here by just pushing on the tabs and pulling them free. Then, you want to pry back on this clip that's on your door handle cable. Once it's out of the bracket, just unhook the door handle cable and you door panel is free.
Flip your door panel over and apply pressure to the switch while prying out the tabs on the side and it will pop out.
Now on the left is the old power switch. On the right is the new one from 1A Auto. You can see that they're very similar and they'll fit exactly the same. Take your new power switch and just push it into place.
Now to reattach your door panel, you just want to connect these two harnesses. And then re-hook your door handle cable into place and slide that clip forward. Put your lock rod back through your door panel and then put the door panel back into the window sill. And once it's fully into place in the window sill, just hit around the edges to reactivate those clips. Now we'll fast forward as Don replaces those two Phillips screws in the door handle and the two T20 screws along the bottom of the door panel. Now just push your door handle cover back into place and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video we're going to show you how to replace the driver's side switch pack on the 2004 Volkswagen Jetta. It's the same part and process on these Jettas from 1999 to 2005. The items you'll need are a new switch pack from 1AAuto.com, a flat blade screwdriver and a Phillips screwdriver. Start off by prying off this back panel right here on the back of your pull handle. Once that's pulled off, you can just lift up on your switch panel and then push the tab on your harness and pull it free.
Now on the back of your switch panel you'll see three Phillips' screws holding your switch back in. We'll fast forward as Don removes these. Now your switch pack lifts up and out. On the left is the old switch pack. On the right is the new one from 1A Auto. You can see they're identical and they're going to fit exactly the same. Push your new switch pack into place and then replace those three Phillips' screws. We'll fast forward as Don replaces those and tightens them up.
Now reconnect your harness and then push your switch panel directly down into place. Then lock it into place by pushing this panel in. You want to line it up and push it firmly in. Then you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
