Replaces
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video,we're going to show you how to replace the master window switch. Now, this is the driver's side window switch. Sometimes this can go bad. Water can get on it and short it out. One indicator is that the windows will not work from their own positions but they do work from the master window switch. Obviously, you check to make sure that you don't have the window lock button activated. The only tools you will need are a flat-blade screwdriver, and a Phillip screwdriver. This is the same for a '98 to '01 Jetta, the '01- to '05s may be a little different as far as taking the switch panel out.
You want to start by using a screwdriver. There is a little inner panel on your door pull and you pry that out right in the middle then take it out carefully. Now, use your flat blade screwdriver and pry in the back. There are clips all round the edge of that panel, so you just pull it up. It takes a firm pull, but it comes right out. Then, on the bottom side there is a connector, just press a tab and pull the connector free.
Now, we turn it over. On the back there are three screws that hold the switch in. I'll remove those. Then, we'll speed it up here as I take those out. Then quite simply, once those are out, the switch just pulls right out of that panel and a new switch from 1A Auto fits, right out of the box.
It's going to go in reinstall with the same three screws and plug in just like the original. Put it back in. Start that first screw that's easy to get to first. I always start my screws first. Start the other ones by putting the screws on the screwdriver and turning them upside down, then tighten them up nice and firm.
Once you have them tight, plug your panel back in or your switch back in and put the panel in place. Make sure you press it down well into all those clips. Make sure they set, then put your inner panel back on.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the power window switch. This switch is the same for the passenger front as well as both rear doors. We're going to show you the passenger's front door. The rear doors are the same. You just need to check out our video for a rear door panel removal and installation. Tools are the same as for door panel removal: flat blade screwdriver, Phillips screwdriver, T25 Torx driver, and a door panel clip tool or a putty knife.
Start by going right up underneath here and prying it out. That pushes out on this panel, here. Pull that off. Now inside there, there are two Phillips screws. Then down at the bottom of the panel, there are two T25 screws: one there near the light and one a little further back. Speed it up here as I take those screws out. The top screws, they'll generally stay in there then fall out as you pull the panel off. The other alternative is if you have a magnet you can pull them out with a magnet. Now you'll want to use a door panel clip tool. What you do, is put this in here and slide it up until you feel yourself come to a clip. Then insert it around the clip, and pull it until it releases the clip. Do that again. Repeat for all the clips. If you don't have a tool like that, you can use a household putty knife. Do the same thing. You just come up to the clip, right next to it and pull. That came out from the speaker. It's just the insulator for the speaker. Once you've got the clips undone, then you just lift that up. Make sure you collect those screws as they come out of that panel. Lift it up and out. Pull this out. You should have to pull out on the little tab and pull your cable backwards, and then out. Then take the hook out of that handle there. There's a couple of harnesses here. They just have little tabs. Squeeze the tabs. Pull down, and then do the same thing for your light. The light has just a couple clips that hold it on. It pulls off. Again, make sure you collect your screws as they fall out. The door panel's off.
To get the power window switch out, take a small screwdriver and carefully pry out on the side here. The switch comes out.
The new one reinstalls the same way. Push it and it'll fit back into place.
Before we put the door panel back on . we saw this fall off as I was taking it out. This goes back in place. Lock it on. First, we put the light back in. Bring it up. Plug our window and lock switches back in. To put this back together, bring it back. Put the hook in. Then you need to bring this back. Get the wire in the grooves. Then slide this forward. Put the panel towards the door. Now make sure your lock button, here, comes up through. Push your panel on and down. Then lock the clips back in place. Reinstall your two Phillips screws. Just speed it up here as we tighten those two Phillips screws. Tighten them in there nice and snug. Then put the two T25 screws in the bottom as well. Put this back into place.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we show you how to replace the master window switch on this 2003 Volkswagen Passat. It's a pretty easy replacement. These will get shorted out a lot if they get wet. The only tool you'll need is a Phillip's screwdriver.
On this door pull, right back here, there's a piece. You kind of squeeze it and pull it back and out. Now you just grab this and firmly try to work your fingernails under and pull it up. Then disconnect your window switch right here.
Now, pretty easily, there are three Phillips screws that hold the switch onto the bezel. I'll just fast-forward here as I remove those three screws. Then, switch your covers out.
The new switch from 1A Auto goes right in the same way. Take my three screws I'll start all three first. These two back ones, I just kind of put down into the hole first, get them in place, then use my screwdriver to get them straight and then in.
Reconnect the switch, put it in place, and snap it down. Then we'll put the locking bezel back in place.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
