Replaces
Frequently bought together
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Created on:
Tools used
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video, we're going to be working with our 1996 GMC Sierra. We're going to show you how to remove and replace your vehicle's washer fluid pump.
If you like this video, please click subscribe. We have a ton more information on this and many other vehicles, and if you need these parts for your truck, you can follow the link down in the description over to 1AAuto.com.
Here are the items you'll need for this repair: 7mm to 15mm socket, ratchet, socket extension, flat blade screwdriver, drain bucket
Open your storage box and remove the lid. There are two tabs located at the front that you'll want to pry out with a flat blade screwdriver and lift up. Remove the 13 millimeter nut inside of the wheel well with a 13 millimeter socket and ratchet. Remove the 10 millimeter bolt at the top of the washer fluid reservoir with a 10 millimeter socket and ratchet.
Remove the 7 millimeter screw on the fill neck. Remove the fill neck from the reservoir. Remove the washer fluid reservoir. Make sure you have a drain bucket set up underneath there. You'll need to remove this cover.
The ends, unsnap with some tabs. Remove that. Disconnect the pump and the hose. Remove the pump from the reservoir. Remove the pump.
Reinstall the pump onto the washer line. Reinstall the pump into the washer. Snap the lines into place. Close the electrical connector. And our cover will hook back onto it's tabs.
Reinstall the washer reservoir. Reinstall the 10 millimeter hold down bolt, and tighten it down with a 10 millimeter socket and ratchet. Install the filler neck, as well as the 7 millimeter screw.
Reinstall the cargo box. Reinstall the 13 millimeter hold down nut. Reinstall the lid. Open the cap and refill your washer reservoir to capacity.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
